116 589 15 15 00 Drift - WS35.00-P-0038C
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 107, 117, 118, 123, 124, 126, 129, 140, 156, 166, 167, 170, 171, 172, 176, 177, 190, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 232, 238, 246, 247, 253, 257, 290, 292
Use in FG 35/Set C
Purpose:
Drift for pressing constant-velocity joint onto and off the rear axle shaft.
Procurement information:
This workshop equipment can be ordered directly through the regular replacement part ordering process at the GLC/LC.