Pulling Off Rubber Mount With Grooved Ball Bearing - AR41.10-P-0100-07LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205, 213, 238, 253

Fig 1: Identifying Puller, Two-Arm (000 589 88 33 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Puller Arms (129 589 00 34 00)

Courtesy of MERCEDES-BENZ USA

Position puller, two-way with puller arms (see enlarged detail).
Detach elastomer bearing (7b) together with grooved ball bearing from joint fork of rear propeller shaft.

Courtesy of MERCEDES-BENZ USA