Connect Sections Of Propeller Shaft - AR41.10-P-0050-05LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205, 213, 238, 253
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1001-06A | Long-life grease | A 000 989 63 51 11 |
- Check front propeller shaft (20a), rear propeller shaft (20b), thrust plate (1), seal bellows (2) and propeller shaft intermediate bearing (7) for wear and damage, and replace if necessary.
- Coat splined profile of rear propeller shaft (20b) with longlife grease.
- Connect front propeller shaft (20a) and rear propeller shaft (20b).
The humps of the front propeller shaft (20a) must be located between the two humps on the rear propeller shaft (20b) (arrows). Make sure that the seal bellows (2) is seated correctly.