116 589 09 43 00 Removal And Installation Tool - WS41.00-P-0001C
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 107, 123, 124, 126, 129, 140, 170, 171, 172, 201, 202, 203, 204, 205, 207, 209.3/4, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 238, 253, 257, 290, 636, 639
Use in FG 41/Set C
Purpose:
Press out/in tool Ø 30 mm for ball bearings in propeller shaft intermediate bearing