Check Propeller Shaft Flex Disks For Signs Of Damage And Deformation - AP41.10-P-4152EW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205, 207, 212, 213, 218, 231, 238, 253 (except 253.99), 257, 290
Shown on model 253.925
Shown on model 212
Illustration shows model 213
| Risk of injury . Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Preparatory activity | |||
| 1 | Lift vehicle with lifting platform. | ||
| AR00.60-P-1006A | |||
| Check | |||
| 2 | Check flex disks (1) for crack formation, wear, damage and deformation. | If problems occur, ↓ rectify problems. |
|
| 3 | Check propeller shaft flange (2) for crack formation, wear, damage and deformation. | Model 253 (except 253.99) Model 290 with code M005 (4MATIC) If problems occur, ↓ rectify problems. |
|
| Finishing activity | |||
| 4 | Lower vehicle with vehicle lift. | ||
| AR00.60-P-1006A |