Front Axle Transmission - BA33.30-P-1000-03G
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 204, 205, 206, 207, 212, 213, 216, 217, 218, 221, 222, 223, 238, 253, 257, 290
MODIFICATION NOTES
| 04.06.2021 | Value changed: Collar bolt, front axle gear to engine support | Model 206 |
FRONT AXLE GEAR
| Number | Designation | Model 204 | Model 205 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-03G | Collar bolt, cover to front axle gear | Nm | 55 | 55 | |
| BA33.30-P-1003-03G | Collar bolt/nut, joint flange to drive pinion | Nm | 100 | 100 | |
| BA33.30-P-1004-03G | Collar bolt, retaining plate to front axle differential | Nm | 55 | 55 | |
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Nm | 65 | 65 | |
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 | 5 |
| Stage 2 | Nm | 50 | 50 | ||
| Stage 3 | ∠° | 95 | 95 | ||
| BA33.30-P-1008-03G | Front axle transmission drain screw | Nm | 20 | 20 | |
| BA33.30-P-1009-03G | Collar bolt, heat shield to holder of heat shield/retaining plate/front axle differential | Nm | 8 | 8 | |
| BA33.30-P-1010-03G | Collar bolt, holder for heat shield to transmission/holder for exhaust system | M6 | Nm | 8 | 11 |
| M8 | Nm | - | - | ||
| BA33.30-P-1011-03G | Collar bolt, support to oil pan | Nm | 60 | 60 | |
| BA33.30-P-1012-03G | Screw/bolt, propeller shaft to front axle gear | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 95 | 95 | ||
| BA33.30-P-1014-03G | Front axle transmission filling screw | M24 | Nm | 25 | 25 |
| BA33.30-P-1015-03G | Collar bolt, front axle gear to crankcase lower section | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
FRONT AXLE GEAR
| Number | Designation | Model 206 | Model 207 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-03G | Collar bolt, cover to front axle gear | Nm | 55 | 55 | |
| BA33.30-P-1003-03G | Collar bolt/nut, joint flange to drive pinion | Nm | 100 | 100 | |
| BA33.30-P-1004-03G | Collar bolt, retaining plate to front axle differential | Nm | - | 55 | |
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Nm | - | 65 | |
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 | 5 |
| Stage 2 | Nm | 50 | 50 | ||
| Stage 3 | ∠° | 45 | 95 | ||
| BA33.30-P-1008-03G | Front axle transmission drain screw | Nm | 20 | 20 | |
| BA33.30-P-1009-03G | Collar bolt, heat shield to holder of heat shield/retaining plate/front axle differential | Nm | 8 | 8 | |
| BA33.30-P-1010-03G | Collar bolt, holder for heat shield to transmission/holder for exhaust system | M6 | Nm | 8 | 8 |
| M8 | Nm | - | - | ||
| BA33.30-P-1011-03G | Collar bolt, support to oil pan | Nm | - | 60 | |
| BA33.30-P-1012-03G | Screw/bolt, propeller shaft to front axle gear | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 95 | 95 | ||
| BA33.30-P-1014-03G | Front axle transmission filling screw | M24 | Nm | 25 | 25 |
| BA33.30-P-1015-03G | Collar bolt, front axle gear to crankcase lower section | Stage 1 | Nm | 50 | - |
| Stage 2 | ∠° | 45 | - | ||
FRONT AXLE GEAR
| Number | Designation | Model 212 | Model 213 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-03G | Collar bolt, cover to front axle gear | Nm | 55 | 55 | |
| BA33.30-P-1003-03G | Collar bolt/nut, joint flange to drive pinion | Nm | 100 | 100 | |
| BA33.30-P-1004-03G | Collar bolt, retaining plate to front axle differential | Nm | 55 | 55 | |
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Nm | 65 | 65 | |
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 | 5 |
| Stage 2 | Nm | 50 | 50 | ||
| Stage 3 | ∠° | 95 | 95 | ||
| BA33.30-P-1008-03G | Front axle transmission drain screw | Nm | 20 | 20 | |
| BA33.30-P-1009-03G | Collar bolt, heat shield to holder of heat shield/retaining plate/front axle differential | Nm | 8 | 8 | |
| BA33.30-P-1010-03G | Collar bolt, holder for heat shield to transmission/holder for exhaust system | M6 | Nm | 8 | 11 |
| M8 | Nm | - | - | ||
| BA33.30-P-1011-03G | Collar bolt, support to oil pan | Nm | 60 | 60 | |
| BA33.30-P-1012-03G | Screw/bolt, propeller shaft to front axle gear | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 95 | 95 | ||
| BA33.30-P-1014-03G | Front axle transmission filling screw | M24 | Nm | 25 | 25 |
| BA33.30-P-1015-03G | Collar bolt, front axle gear to crankcase lower section | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
FRONT AXLE GEAR
| Number | Designation | Model 216 | Model 217 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-03G | Collar bolt, cover to front axle gear | Nm | 55 | 47 | |
| BA33.30-P-1003-03G | Collar bolt/nut, joint flange to drive pinion | Nm | 100 | 100 | |
| BA33.30-P-1004-03G | Collar bolt, retaining plate to front axle differential | Nm | 55 | 55 | |
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Nm | 65 | 65 | |
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 | 5 |
| Stage 2 | Nm | 50 | 50 | ||
| Stage 3 | ∠° | 95 | 95 | ||
| BA33.30-P-1008-03G | Front axle transmission drain screw | Nm | 20 | 20 | |
| BA33.30-P-1009-03G | Collar bolt, heat shield to holder of heat shield/retaining plate/front axle differential | Nm | 8 | 8 | |
| BA33.30-P-1010-03G | Collar bolt, holder for heat shield to transmission/holder for exhaust system | M6 | Nm | 8 | 12 |
| M8 | Nm | - | - | ||
| BA33.30-P-1011-03G | Collar bolt, support to oil pan | Nm | 60 | 60 | |
| BA33.30-P-1012-03G | Screw/bolt, propeller shaft to front axle gear | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 95 | 90 | ||
| BA33.30-P-1014-03G | Front axle transmission filling screw | M24 | Nm | 25 | 25 |
| BA33.30-P-1015-03G | Collar bolt, front axle gear to crankcase lower section | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
FRONT AXLE GEAR
| Number | Designation | Model 218 | Model 221 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-03G | Collar bolt, cover to front axle gear | Nm | 55 | 55 | |
| BA33.30-P-1003-03G | Collar bolt/nut, joint flange to drive pinion | Nm | 100 | 100 | |
| BA33.30-P-1004-03G | Collar bolt, retaining plate to front axle differential | Nm | 55 | 55 | |
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Nm | 65 | 65 | |
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 | 5 |
| Stage 2 | Nm | 50 | 50 | ||
| Stage 3 | ∠° | 95 | 95 | ||
| BA33.30-P-1008-03G | Front axle transmission drain screw | Nm | 20 | 20 | |
| BA33.30-P-1009-03G | Collar bolt, heat shield to holder of heat shield/retaining plate/front axle differential | Nm | 8 | 8 | |
| BA33.30-P-1010-03G | Collar bolt, holder for heat shield to transmission/holder for exhaust system | M6 | Nm | 12 | 8 |
| M8 | Nm | - | - | ||
| BA33.30-P-1011-03G | Collar bolt, support to oil pan | Nm | 60 | 60 | |
| BA33.30-P-1012-03G | Screw/bolt, propeller shaft to front axle gear | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 95 | 95 | ||
| BA33.30-P-1014-03G | Front axle transmission filling screw | M24 | Nm | 25 | 25 |
| BA33.30-P-1015-03G | Collar bolt, front axle gear to crankcase lower section | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
FRONT AXLE GEAR
| Number | Designation | Model 222 | Model 223 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-03G | Collar bolt, cover to front axle gear | Nm | 47 | 47 | |
| BA33.30-P-1003-03G | Collar bolt/nut, joint flange to drive pinion | Nm | 100 | 100 | |
| BA33.30-P-1004-03G | Collar bolt, retaining plate to front axle differential | Nm | 55 | 55 | |
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Nm | 65 | 65 | |
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 | 5 |
| Stage 2 | Nm | 50 | 50 | ||
| Stage 3 | ∠° | 95 | 95 | ||
| BA33.30-P-1008-03G | Front axle transmission drain screw | Nm | 20 | 20 | |
| BA33.30-P-1009-03G | Collar bolt, heat shield to holder of heat shield/retaining plate/front axle differential | Nm | 8 | 8 | |
| BA33.30-P-1010-03G | Collar bolt, holder for heat shield to transmission/holder for exhaust system | M6 | Nm | 12 | 12 |
| M8 | Nm | - | 20 | ||
| BA33.30-P-1011-03G | Collar bolt, support to oil pan | Nm | 60 | 60 | |
| BA33.30-P-1012-03G | Screw/bolt, propeller shaft to front axle gear | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 95 | 95 | ||
| BA33.30-P-1014-03G | Front axle transmission filling screw | M24 | Nm | 25 | 25 |
| BA33.30-P-1015-03G | Collar bolt, front axle gear to crankcase lower section | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
FRONT AXLE GEAR
| Number | Designation | Model 238 | Model 253 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-03G | Collar bolt, cover to front axle gear | Nm | 55 | 55 | |
| BA33.30-P-1003-03G | Collar bolt/nut, joint flange to drive pinion | Nm | 100 | 100 | |
| BA33.30-P-1004-03G | Collar bolt, retaining plate to front axle differential | Nm | 55 | 55 | |
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Nm | 65 | 65 | |
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 | 5 |
| Stage 2 | Nm | 50 | 50 | ||
| Stage 3 | ∠° | 95 | 95 | ||
| BA33.30-P-1008-03G | Front axle transmission drain screw | Nm | 20 | 20 | |
| BA33.30-P-1009-03G | Collar bolt, heat shield to holder of heat shield/retaining plate/front axle differential | Nm | 8 | 8 | |
| BA33.30-P-1010-03G | Collar bolt, holder for heat shield to transmission/holder for exhaust system | M6 | Nm | 11 | 11 |
| M8 | Nm | - | - | ||
| BA33.30-P-1011-03G | Collar bolt, support to oil pan | Nm | 60 | 60 | |
| BA33.30-P-1012-03G | Screw/bolt, propeller shaft to front axle gear | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 95 | 95 | ||
| BA33.30-P-1014-03G | Front axle transmission filling screw | M24 | Nm | 25 | 25 |
| BA33.30-P-1015-03G | Collar bolt, front axle gear to crankcase lower section | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
FRONT AXLE GEAR
| Number | Designation | Model 257 | Model 290 | ||
|---|---|---|---|---|---|
| BA33.30-P-1001-03G | Collar bolt, cover to front axle gear | Nm | 55 | 55 | |
| BA33.30-P-1003-03G | Collar bolt/nut, joint flange to drive pinion | Nm | 100 | 100 | |
| BA33.30-P-1004-03G | Collar bolt, retaining plate to front axle differential | Nm | 55 | 55 | |
| BA33.30-P-1006-03G | Collar bolt, front axle differential to support/oil pan | Nm | 65 | 65 | |
| BA33.30-P-1007-03G | Collar bolt, front axle gear to engine support | Stage 1 | Nm | 5 | 2 |
| Stage 2 | Nm | 50 | 50 | ||
| Stage 3 | ∠° | 95 | 95 | ||
| BA33.30-P-1008-03G | Front axle transmission drain screw | Nm | 20 | 20 | |
| BA33.30-P-1009-03G | Collar bolt, heat shield to holder of heat shield/retaining plate/front axle differential | Nm | 8 | 8 | |
| BA33.30-P-1010-03G | Collar bolt, holder for heat shield to transmission/holder for exhaust system | M6 | Nm | 11 | 11 |
| M8 | Nm | - | - | ||
| BA33.30-P-1011-03G | Collar bolt, support to oil pan | Nm | 60 | 60 | |
| BA33.30-P-1012-03G | Screw/bolt, propeller shaft to front axle gear | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 95 | 95 | ||
| BA33.30-P-1014-03G | Front axle transmission filling screw | M24 | Nm | 25 | 25 |
| BA33.30-P-1015-03G | Collar bolt, front axle gear to crankcase lower section | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||