Drain/Pour In Front Axle Gear Oil - AR33.25-P-0300-01LWX
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205, 213, 238, 253, 257, 290 with transmission 725.0 with code M005 (Vehicles with 4MATIC/all-wheel drive) With VAG 160
Model 253 with transmission 724.2 With VAG 160
Model 257 with transmission 725.1 with code M005 (Vehicles with 4MATIC/all-wheel drive) With VAG 160
| Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. Do not pour transmission oil into beverage bottles. |
AS00.40-Z-0001-01A |
FRONT AXLE DIFFERENTIAL
| Number | Designation | Model 205 | Model 213 | |
|---|---|---|---|---|
| BA33.30-P-1008-03G | Front axle transmission drain screw | Nm | 20 | 20 |
FRONT AXLE DIFFERENTIAL
| Number | Designation | Model 238 | Model 253 | |
|---|---|---|---|---|
| BA33.30-P-1008-03G | Front axle transmission drain screw | Nm | 20 | 20 |
FRONT AXLE DIFFERENTIAL
| Number | Designation | Model 257 | Model 290 | |
|---|---|---|---|---|
| BA33.30-P-1008-03G | Front axle transmission drain screw | Nm | 20 | 20 |
FRONT AXLE DIFFERENTIAL
| Number | Designation | Model 205 | Model 213 | ||
|---|---|---|---|---|---|
| BA33.30-P-1014-03G | Front axle transmission filling screw | M24 | Nm | 25 | 25 |
FRONT AXLE DIFFERENTIAL
| Number | Designation | Model 238 | Model 253 | ||
|---|---|---|---|---|---|
| BA33.30-P-1014-03G | Front axle transmission filling screw | M24 | Nm | 25 | 25 |
FRONT AXLE DIFFERENTIAL
| Number | Designation | Model 257 | Model 290 | ||
|---|---|---|---|---|---|
| BA33.30-P-1014-03G | Front axle transmission filling screw | M24 | Nm | 25 | 25 |
FRONT AXLE GEAR
| Number | Designation | Model 205 | Model 213 | ||
|---|---|---|---|---|---|
| BF33.30-P-1001-03F | Hypoid gear oil | Filling capacity | Liter | 0, 55 | 0, 55 |
| Universal hypoid gear oil | BB00.40-P-0235-07A | BB00.40-P-0235-07A | |||
| Overview of axle gear oils | BB00.40-P-0231-01A | BB00.40-P-0231-01A | |||
| Axle gear oils | BB00.40-P-0239-72A | BB00.40-P-0239-72A | |||
FRONT AXLE GEAR
| Number | Designation | Model 238 | Model 253 | ||
|---|---|---|---|---|---|
| BF33.30-P-1001-03F | Hypoid gear oil | Filling capacity | Liter | 0, 55 | 0, 55 |
| Universal hypoid gear oil | BB00.40-P-0235-07A | BB00.40-P-0235-07A | |||
| Overview of axle gear oils | BB00.40-P-0231-01A | BB00.40-P-0231-01A | |||
| Axle gear oils | BB00.40-P-0239-72A | BB00.40-P-0239-72A | |||
FRONT AXLE GEAR
| Number | Designation | Model 257 | Model 290 | ||
|---|---|---|---|---|---|
| BF33.30-P-1001-03F | Hypoid gear oil | Filling capacity | Liter | 0, 55 | 0, 55 |
| Universal hypoid gear oil | BB00.40-P-0235-07A | BB00.40-P-0235-07A | |||
| Overview of axle gear oils | BB00.40-P-0231-01A | BB00.40-P-0231-01A | |||
| Axle gear oils | BB00.40-P-0239-72A | ||||
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1046-04A | Loctite 7063 (400 ml) cleaning spray | A 001 986 71 71 09 |
| BR00.45-Z-1110-02A | Quick-acting adhesive Omnifit 100H (50 g) | A 002 989 23 71 |
Drain off
- Remove filling screw (3).
- Remove drain screw (2) and collect hypoid gear oil in a suitable container.
- Remove sealing ring of drain screw (2).
Pour in
- Clean thread of drain screw (2) and filling screw (3) in housing of transfer case (1) free of grease using Loctite 7063 cleaning spray.
- Attach sealing ring on drain screw (2).
Replace seal.
- Screw in drain screw (2) and tighten to specified torque
- Fill hypoid gear oil using
hand pump
.
- Coat first pitch of thread of filling screw (3) with Omnifit 100H quick-acting adhesive.
- Screw in filling screw (3) and tighten to specified torque
.
Example illustration