460 589 15 15 00 Drift Punch - WS33.00-P-0071B
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 204, 205, 206, 207, 212, 213, 216, 217, 218, 221, 222, 223, 238, 253, 257, 290
Model 460, 461, 463 with front axle 730.3
Use in FG 33/Set B
Purpose:
Drift for installing the sealing rings and the coupling flange on the drive pinion.
Drift for installing the grooved ball bearing on the intermediate shaft.
NOTE:
Front axle 730.3
As of axle no. 7500804 with BGS 7501979 series, two sealing rings are installed.
| 460 589 15 15 00 Drift | FG 28/Set C | WS28.00-N-3078C | |
| 460 589 15 15 00 Drift | FG 35/Set B | WS35.00-N-3047B |