203 589 03 33 00 Internal Extractor - WS33.00-P-0148B
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model all (4xWD, CAR, Light transporter)
Use in FG 27/33/35 Set B
Purpose:
The internal extractor is used for pulling out the right radial shaft sealing ring on the front axle differential.
The internal extractor is used for pulling out the bearing cap and the bearing on the rear transmission housing.