202 589 04 43 00 Extraction Tool - WS33.00-P-0114B
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 124, 129, 156, 163, 164, 168, 169, 170, 171, 172, 176, 201, 202, 203, 204, 205, 208, 209, 210, 212, 213, 216, 218, 221, 238, 245.20/23, 246, 251, 253, 414
Use in FG 33/Set B
Purpose:
Pull-off device for wheel hub.
Plate for setting shims when pressing out elastomer bearing of strut rod in model 205, 213, 238 and 253.
NOTE:
Do not exceed max. torque of 50 Nm on press spindle.
Mode 168: In combination with W 168 589 00 43 00 Backplate.
Model 169, 242: In combination with W 202 589 04 43 06 Plate.
| 202 589 04 43 07 Plate | Model 117, 124, 129, 156, 163, 170, 172, 176, 201, 202, 203, 204, 205, 208, 209, 210, 213, 238, 246, 253 FG 33/35/Set C |
WS35.00-P-0153-01C |