Belt Tensioning Device - BA13.25-P-1000-01Z
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine 133, 139, 260, 270, 274
BELT TENSIONING DEVICE
| Number | Designation | Engine 133 | Engine 139 | |
|---|---|---|---|---|
| BA13.25-P-1001-01Z | Bolt, tensioning device to timing case cover | Nm | 20 | - |
| BA13.25-P-1002-01Z | Screw/bolt, guide pulley to timing case cover | Nm | 20 | - |
| BA13.25-P-1003-01Z | Screw/bolt, tensioning device to crankcase | Nm | - | - |
| BA13.25-P-1004-01Z | Bolt, guide pulley to alternator | Nm | - | - |
| BA13.25-P-1005-01Z | Pretension for poly-V belts on multi-tooth clamping device | Nm | - | - |
| BA13.25-P-1006-01Z | Screw, belt tensioner to alternator | Nm | - | 20 |
| BA13.25-P-1007-01Z | Screw, guide pulley to belt tensioner | Nm | - | 45 |
| BA13.25-P-1008-01Z | Screw, guide pulley to holder | Nm | - | 45 |
BELT TENSIONING DEVICE
| Number | Designation | Engine 260 | Engine 270 | |
|---|---|---|---|---|
| BA13.25-P-1001-01Z | Bolt, tensioning device to timing case cover | Nm | 20 | 20 |
| BA13.25-P-1002-01Z | Screw/bolt, guide pulley to timing case cover | Nm | 20 | 20 |
| BA13.25-P-1003-01Z | Screw/bolt, tensioning device to crankcase | Nm | - | - |
| BA13.25-P-1004-01Z | Bolt, guide pulley to alternator | Nm | - | - |
| BA13.25-P-1005-01Z | Pretension for poly-V belts on multi-tooth clamping device | Nm | - | - |
| BA13.25-P-1006-01Z | Screw, belt tensioner to alternator | Nm | - | - |
| BA13.25-P-1007-01Z | Screw, guide pulley to belt tensioner | Nm | - | - |
| BA13.25-P-1008-01Z | Screw, guide pulley to holder | Nm | - | - |
BELT TENSIONING DEVICE
| Number | Designation | Engine 274 | |
|---|---|---|---|
| BA13.25-P-1001-01Z | Bolt, tensioning device to timing case cover | Nm | - |
| BA13.25-P-1002-01Z | Screw/bolt, guide pulley to timing case cover | Nm | - |
| BA13.25-P-1003-01Z | Screw/bolt, tensioning device to crankcase | Nm | 58 |
| BA13.25-P-1004-01Z | Bolt, guide pulley to alternator | Nm | 20 |
| BA13.25-P-1005-01Z | Pretension for poly-V belts on multi-tooth clamping device | Nm | 55 |
| BA13.25-P-1006-01Z | Screw, belt tensioner to alternator | Nm | - |
| BA13.25-P-1007-01Z | Screw, guide pulley to belt tensioner | Nm | - |
| BA13.25-P-1008-01Z | Screw, guide pulley to holder | Nm | - |