Remove/Install Glove Compartment - AR68.10-P-1400LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
Model 253
Model 293
MODIFICATION NOTES
| 28.02.2019 | Special tool replaced. | Operation step 2 |
Shown on model 205 except code P21 (Air quality package)
| Remove/install | |||
| 1 | Remove cover below the instrument panel on the front passenger side. | Model 293 | AR68.10-P-1502EQ |
| Model 205, 253 | AR68.10-P-1520LW | ||
| 2 | Remove instrument panel cover (2). | Fig 1 | |
| 3 | Remove screws (4) at the bottom from the glove compartment (1). | ||
| 4 | Open glove compartment (1). | ||
| 5 | Remove flacon from the odor generator. | Model 205, 253, 293 with code P21 (Air quality package) | |
| 6 | Remove screw/bolts (3). | ||
| 7 | Pull glove compartment (1) out in the direction of the arrow until the electrical connector (5) is accessible. | ||
| 8 | Disconnect electrical connector and hose from the odor generator. | Model 205, 253, 293 with code P21 (Air quality package) | |
| 9 | Disconnect electrical connector (5) and remove glove compartment (1). | ||
| 10 | Install in the reverse order |