Remove/Install Cover On Instrument Cluster - AR68.10-P-0009LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
with code 464 (Full display digital instrument cluster)
Model 253 (except 253.992/993)
as of model year 2020
with code 464 (Full display digital instrument cluster)
| Remove/install | |||
| 1 | Position steering wheel towards rear and bottom. | ||
| 2 | Unclip cover (1) at bottom (arrows A) and detach at retaining clamps (2). | Fig 1 | |
| 3 | Remove screw/bolts (3). | ||
| 4 | Detach instrument cluster cover (4) in upper area (arrows B) by pulling out of retaining clips and remove. | ||
| 5 | Install in the reverse order. |