Remove/Install Right Air Vent - AR83.10-P-4502LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205

Model 213

Model 253

Shown on model 205.### 1#

Fig 1: Right Side Air Vent Components Location - Model 253 (Shown On Model 205.### 1#)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Adjust the steering column backwards and downwards into its final position	Model 205.### 2#, 213.### 2#, 253.### 2#
2	Insert extraction hook into side notches (arrows) of right side air vent (1) and pull right side air vent (1) out of instrument panel (2)	Make sure that "TOP" marking on right side air vent (1) is pointing upwards. Extraction hook	Fig 2
3	Install in the reverse order

Fig 2: Identifying Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA