LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> C300 4Matic, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 349 (Climate Control - 253 Chassis 2 Of 3) >> Testing & Repair >> Remove/Install Center Air Vent - AR83.10-P-4503LW

Remove/Install Center Air Vent - AR83.10-P-4503LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205 

Model 253 

Shown on model 205 

Fig 1: Center Air Vent Components Location - Model 253 (Shown On Model 205)
G14188775Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Insert extraction hooks into side cutouts (arrows) on center air vent (1) and pull center air vent (1) out of instrument panel (2) INSTALLATION IMPORTANT Make sure that the marking "TOP" on the center air vent (1) is pointing upward.
SPECIAL TOOL Extraction hook
Fig 2
2 Install in the reverse order    
Fig 2: Identifying Extraction Hook (140 589 02 33 00)
G11128914Courtesy of MERCEDES-BENZ USA