Remove/Install Radar Sensor In Rear Bumper - AR54.21-P-0704LWM
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
as of model year 2019
with code 233 (DISTRONIC PLUS)
Model 205
as of model year 2019
with code 234 (Blind Spot Monitoring)
Model 253 (except 253.992/993)
as of model year 2020
with code 233 (DISTRONIC PLUS)
Model 253 (except 253.992/993)
as of model year 2020
with code 234 (Blind Spot Monitoring)
Shown on model 205 with code 233 (DISTRONIC PLUS)
Fig 1: Radar Sensor In Rear Bumper Components Location - Model 253 (Except 253.992/993) As Of Model Year 2020 (Shown On Model 205 With Code 233)
Shown on model 205 with code 234 (Blind Spot Assist)
Fig 2: Radar Sensor In Rear Bumper Components Location - Model 253 (Except 253.992/993) As Of Model Year 2020 (Shown On Model 205 With Code 234)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on preventing damage to electronic components due to a magnetic tool | AH54.00-P-0002-01A | ||
| Remove/install | |||
| 1 | Commission rear bumper radar sensor (B92/6, B92/7, B92/10, B92/11). | When replacing rear bumper radar sensor (B92/6, B92/7, B92/10, B92/11). | |
| AD00.00-P-2000-04B | |||
| 2 | Remove bumper (1). | Model 253 (except 253.992/993) as of model year 2020 with code 233 (DISTRONIC PLUS) Model 253 (except 253.992/993) as of model year 2020 with code 234 (Blind Spot Monitoring) |
AR88.20-P-2200LWG |
| Model 205.2 as of model year 2019 with code 233 (DISTRONIC PLUS) Model 205.2 as of model year 2019 with code 234 (Blind Spot Monitoring) |
AR88.20-P-2200LWS | ||
| Model 205.0/1/3/4 as of model year 2019 with code 233 (DISTRONIC PLUS) Model 205.0/1/3/4 as of model year 2019 with code 234 (Blind Spot Monitoring) |
AR88.20-P-2200LW | ||
| 3 | Release and remove holder (2) with rear bumper radar sensor (B92/6, B92/7, B92/10, B92/11). | ||
| 4 | Disconnect electrical connector (3) from rear bumper radar sensor (B92/6, B92/7, B92/10, B92/11). | ||
| 5 | Unclip rear bumper radar sensor (B92/6, B92/7, B92/10, B92/11) from cover and remove. | ||
| 6 | Install in the reverse order |