210 589 00 91 00 Test Cap - WS20.00-P-0017B

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 117, 118, 124, 129, 140, 156, 163, 164, 166, 167, 170, 171, 172, 176, 177, 190, 197, 199, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 223, 230, 231, 238, 240, 242, 243, 246, 247, 251, 253, 257, 290, 292, 293, 297, 447, 448, 461, 463

Model 470, 471 with engine 642

Model 636 with engine 272, 646, 651

Model 639 with engine 112, 272, 642, 646, 651

Model 907, 910

Use in FG 01/08/09/14/15/20/54/83/set B

Purpose:

Tester cap with thread for coolant expansion reservoir for W 124 589 24 21 00 pressure pump and W 285 589 00 21 00 vacuum-type Cooling system filler.

Procurement information:

This workshop equipment can be ordered directly through the regular replacement part ordering process at the GLC/LC.

Courtesy of MERCEDES-BENZ USA