Retrofit Touchpad Wiring Harness - AN82.60-P-0017-01LWG

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 253.3/9

with code 3U1 (Headunit europe/CIS-states/Monoglei)

Connect white 4-pin coupling (2.1) of touchpad wiring harness (2) to touchpad (A105).
Route wiring harness for touchpad (2) into cover for center console.
Connect remaining electrical connectors of touchpad wiring harness (2).
Depending on the equipment variant, a different number of electrical connectors may be present at the touchpad wiring harness (2).

Strap down connectors not required.

The front center console electrical connector (X138/1) is connected when installing the center console cover.

Courtesy of MERCEDES-BENZ USA