Prepare Body Flange For Installing Side Windows - AR67.30-P-0005-04LWG
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205.2, 213.1/2, 223.9, 253, 293
| Notice |
General notes about painting the body flange in the glazing area |
|
AH98.00-P-9408-06A |
REPAIR MATERIALS
| Number |
Designation |
Order number |
| BR00.45-Z-1012-07A |
Primer stick |
A 000 986 27 50 |
The bonding area (2) must be completely free of dust and grease. Otherwise the adhesive force of the adhesive material starts to decrease.
When damaged to a degree of < 10 % it is possible to repair with primer stick. If damage is > 10 %, the body flange (1) must be coated with primer filler.
Otherwise corrosion damage may occur.
- Level residual adhesive material on body flange (1) down to a height of approx. 2 mm using suitable scraper and remove loose adhesive material.
- Clean working area.
- Clean adhesive area (2) on body flange (1) and rub dry with dry cloth.
- Repair paint damage in bonding area (2) and on body flange (1) with primer stick or primer filler.
Observe the manufacturer's specifications for the curing and processing time of the primer filler.
- Apply primer to areas of body flange (1) where no remaining or damaged adhesive is present.
Allow primer to flash off at least 10 min.
Otherwise the adhesive force of the adhesive material starts to decrease.
Use only primer filler and primer sticks approved by Daimler AG: https://xentryportaLi.daimler.com
Only use the adhesive kit specified in the XENTRY Portal parts information.
 Courtesy of MERCEDES-BENZ USA
|