Prepare Adhesive Cartridge - AR67.00-P-0001-02LWE

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205, 213, 238, 253, 293

Fig 1: Identifying Adapter (000 589 86 63 00)

Courtesy of MERCEDES-BENZ USA

Remove cartridge from repair kit and heat in cartridge preheater.
Heating time is approx.60 min.

Use only repair kit specified in EPC.
Screw on application nozzle onto cartridge.
Insert adapter and cartridge into squeeze gun.
The adhesive material can be pressed out using a commercially available electric battery-powered gun or pneumatic squeeze gun with piston rod. To press out the cartridge completely, install the adapter between the cartridge piston and the plate on the push rod of the squeeze gun.