Notes On Removal/Installation Of Windshield - AH67.10-P-1000-01P

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 117, 118, 156, 166, 168, 169, 170, 171, 172, 176, 177, 190, 197, 202, 203, 204, 205, 207, 209, 210, 211, 212, 213, 216.3, 217, 218, 219, 221.0/1, 222, 230.4, 231, 240, 242, 245.2, 246, 247, 253, 292, 293, 414.700, 453, 463

Model all (TRUCK)

Allow primer to flash off for at least 10 min.

Otherwise, the adhesive effect of the adhesive material will be impaired.

Leave side window on driver's door open during the curing time of the adhesive material.

Otherwise, the windshield will be pressed outwards when closing the doors because of the resulting air pressure.

Position the windshield within a period of 10 minutes onto the body flange.

Otherwise, the adhesive force of the adhesive material will be impaired.

Keep bonding area absolutely free of dust and grease.

Otherwise the adhesive force of the adhesive material starts to decrease when installing the window.

The drive-away time for the 2-component repair kit is 1 h.

The drive-away time for the 1-component repair kit is 2 h.