Notes On Removal/Installation Of Rear Window - AH67.20-P-2000-02A
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 167, 177, 205, 206, 213, 223, 238, 243, 247, 253, 257, 290, 293, 297
Model 453
The side window in the driver door must be lowered during the curing time of the adhesive material.
Otherwise the rear window may be pushed outward by the resulting air pressure when the doors are closed.
The areas around the rear window must be masked off with suitable duct tape.
Otherwise there is a risk of damaging the vehicle paintwork when cutting out.
Working on the rear window
- If the repair is to be conducted correctly, approved materials and tools must always be used.
The material characteristics of the recommended products effect the results of the work as well as the labor time required.
- Adhesive bonds are a part of the unibody construction. Always exercise particular care when performing work on bonded windows.