Gap Dimensions - Be60.00-P-1000-01FA
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 253
TEST AND ADJUSTMENT VALUES FOR GAP DIMENSIONS
| Number | Designation | Model 253.3 | Model 253.1/9 | ||
|---|---|---|---|---|---|
| BE60.00-P-1001-01FA | Engine hood to fender | Dimension "A" | mm | 3, 0 (± 0, 5) | 3, 0 (±0, 5) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1002-01FA | Engine hood to headlamp | Dimension "B" | mm | 14, 5 (+2/-1, 5) | 14, 5 (+2/-1, 5) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1003-01FA | Engine hood to bumper | Dimension "D" | mm | 4, 5 (+1/-1, 5) | 4, 5 (+1/-1, 5) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1004-01FA | Bumper to headlamp, bottom | Dimension "E1" | mm | 2, 0 (±1) | 2, 0 (±1) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1005-01FA | Bumper to headlamp, side | Dimension "E2" | mm | 2, 5 (±1, 5) | 2, 5 (±1, 5) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1006-01FA | Front door to fender | Dimension "G" | mm | 3, 5 (+1/-0, 5) | 3, 5 (+1/-0, 5) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1007-01FA | Front door to rear door | Dimension "H" | mm | 4 (±0, 5) | 4 (±0, 5) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1008-01FA | Rear door to side piece | Dimension "I" | mm | 3, 5 (±0, 5) | 3, 5 (±0, 5) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1009-01FA | Front door cover to rear door cover | Dimension "J" | mm | 4, 0 (+1/-0, 5) | 4, 0 (+1/-0, 5) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1010-01FA | Fuel filler flap | Dimension "O" | mm | 2, 0 (±0, 5) | 2, 0 (±0, 5) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1011-01FA | Rear side window to rear triangular window | Dimension "P" | mm | 5, 5 (±1, 5) | 5, 5 (±1, 5) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1012-01FA | Roof to rear spoiler/liftgate | Dimension "Q" | mm | - | 4, 5 (±1, 5) |
| For picture, see | - | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1013-01FA | Sidewall to liftgate | Dimension "S" | mm | - | 4, 0 (±1, 5) |
| For picture, see | - | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1014-01FA | Outside of taillamp to inside of taillamp | Dimension "T" | mm | 3, 5 (+1, 5/-1) | 3, 5 (+1, 5/-1) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1015-01FA | Center of liftgate to rear bumper | Dimension "U1" | mm | - | 5, 5 (±1, 5) |
| Dimension "M1" | mm | 6, 0 (±1, 5) | - | ||
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1016-01FA | Outside of liftgate to rear bumper | Dimension "U2" | mm | - | 3, 5 (±1) |
| Dimension "M" | mm | 3, 5 (+1, 5/-1) | - | ||
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1017-01FA | Liftgate to rear window, bottom | Dimension "V1" | mm | - | 2, 0 (±1) |
| For picture, see | - | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1018-01FA | Liftgate to rear window, side | Dimension "V2" | mm | - | 2, 5 (+1, 5/-1) |
| For picture, see | - | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1019-01FA | Outer taillamp to sidewall, bottom | Dimension "W" | mm | 1, 0 (+1/-0, 5) | 1, 0 (+1/-0, 5) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||
| BE60.00-P-1020-01FA | Outside of taillamp to bumper | Dimension "X" | mm | 2, 0 (±1) | 1, 5 (±1) |
| For picture, see | AR60.00-P-0700-01LW . | AR60.00-P-0700-01LW . | |||