253 588 13 23 00 Data Sheet - WS60.00-P-0297K
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 253.9
Use in FG 60/61/62/63/64/Set K
Purpose:
Vehicle specific assembly note for setting up straightening bench.
Test equipment category CAT_A.
NOTE:
In combination with W 000 588 03 23 00 body straightening system.
Technical Note:
The analysis and attachment of all aluminum structural parts of the bodyshell is performed exclusively using the repair method described in WIS.
Reference information:
You can find recommended workshop appliances and information on the manufacturer here:
Manufacturer
Car-O-Liner Group AB
Hulda Mellgrens Gata 1
42132 Vastra Frolunda
Sweden
http://www.car-o-liner.com
- Substructure
Article no.: 14:185
Article no.: 14:186 (with code M016 with increased engine output)
- Side wall
Article no.: 614:149
Article no.: 614:150 (with code M016 with increased engine output)