253 588 12 23 00 Data Specification - WS60.00-P-0323K
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 253.3
Use in FG 60/61/62/63/64/Set B/K
Purpose:
Data specification for checking and fastening body repair work according to Mercedes-Benz specifications.
NOTE:
The analysis and attachment of all aluminum structural parts of the bodyshell is performed exclusively using the repair method described in WIS.
Technical Note:
In combination with W 000 588 02 23 00 bodyshell straightening system.
Procurement information:
Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).
Manufacturer
CAR BENCH INTERNATIONAL S.p.A
Via Dorsale 22
54100 Massa
Italy
http://www.carbench.it
- Underbody data specification: A4245002/EVO
- Sidewall data specification: A7245002/T