253 588 03 23 00 Data Specification - WS60.00-P-0329K
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 253.3
Use in FG 60/61/62/63/64/Set B/K
Purpose:
Vehicle specific assembly note for setting up straightening bench.
NOTE:
The analysis and attachment of all aluminum structural parts of the bodyshell is performed exclusively using the repair method described in WIS.
Technical Note:
In combination with W 000 588 03 23 00 body straightening system.
Procurement information:
Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).
Manufacturer
CAR-O-Liner
VogesenstraBe 3
63811 Stockstadt
Germany
http://www.car-o-liner.com
- Substructure data specification: 14:201
- Side structure data specification: 614:165