000 588 43 23 00 Straightening Bench - WS60.00-P-0376K

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 117, 118, 156, 166 (except 166.8), 167 (except 167.9), 176, 177, 190, 197, 204, 205, 207, 212, 213 (except 213.1), 217, 218, 219, 231, 238, 242, 246, 247, 253, 257

Model 222 (except 222.1/9) except code Z07 (B7 armoring on special protection version)

except code Z19 (Pullman government sedan)

except code Z31 (Pullman Guard government sedan)

Model 453

Model 463

Courtesy of MERCEDES-BENZ USA

Use in FG 60/61/62/63/64/Set K

Purpose:

Straightening bench for measuring and repair of vehicle bodies.

Test equipment category CAT_A.

NOTE: Current data specifications can be obtained directly from the manufacturer.

Procurement information:

Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).

Manufacturer:

CAR-O-LINER AB

Hulda Mellgrens Gata 1

421 32 Vastra Frolunda

Sweden

http://www.car-o-liner.se

Type/model: MB BenchRack 5000 Standard
Article no.: 40216