000 588 23 23 00 Straightening Bench Accessories - WS60.00-P-0061K

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 117, 118, 156, 166, 167, 176, 177, 190, 197, 204.9, 205, 207, 212, 213, 217, 218, 219, 222, 231, 240, 242, 246, 247, 253, 257, 290, 453

Use in FG 60/61/62/63/64/Set K

Purpose:

Straightening bench accessories for checking and fastening during body repair work according to Mercedes-Benz specifications.

Test equipment category CAT_A.

Procurement information:

Sale of this workshop equipment does not take over the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier can be found in the maintenance system document (see below).

Courtesy of MERCEDES-BENZ USA

Manufacturer

CELETTE FRANCE SAS

3, avenue Marcelin Berthelot

38200 Vienne

France

http://www.celette.com

Article no.: MZ2500.MB01