Service Information: Notes On Threads In Body - Si60.00-P-0018B
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model all (CAR)
Please note that the following points must be noted with regard to the thread in the body.
Thread in component parts made of aluminum alloys
- Always screw bolts in and out by hand.
- Tighten bolt with corresponding tightening torque as per basic data.
Defective thread
- For repair requests, create PTSS case with explanatory pictures of the damage.
A defective thread must be checked for repairability before repairing it.
Thread repair
- Not every thread can be repaired.
- If it is not possible to repair the thread, the next largest component part must be replaced.
- A repaired thread must be documented in the VeDoc system.