LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> C300 4Matic, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 341 (Electrical System - Body - 253 Chassis 4 Of 8) >> Testing & Repair >> Remove/Install Telephone Antenna - AR82.62-P-0011LW

Remove/Install Telephone Antenna - AR82.62-P-0011LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205, 213, 238, 253, 293 

with code 274 (Telephone antenna) 

G14188035Courtesy of MERCEDES-BENZ USA

Shown on model 205.0 

G14188036Courtesy of MERCEDES-BENZ USA
Fig 1: Telephone Antenna Components Location - Model 253 With Code 274 (Shown On Model 205.0)
G14188037Courtesy of MERCEDES-BENZ USA

Shown on model 205.0 

Shown on model 205.0 

G14188038Courtesy of MERCEDES-BENZ USA
Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
REMOVINGINSTALLING Remove/install     
1 Remove left outside mirror (M21/1) or right outside mirror (M21/2) Model 238 with code 274 (Telephone antenna) AR88.70-P-9000LWO
    Model 205.0/1/2, 213, 253, 293 with code 274 (Telephone antenna) AR88.70-P-9000LW
    Model 205.3/4 with code 274 (Telephone antenna) AR88.70-P-9000CLW
2 Remove trim from left outside mirror (M21/1) or right outside mirror (M21/2)   AR88.70-P-9040LF
3 Remove lock washer (5) and cover (7) Model 205.0/1/2, 213, 253, 293 with code 274 (Telephone antenna)  
4 Pull seal (6) approx. 15 cm over the electrical lines Model 205.0/1/2, 213, 253, 293 with code 274 (Telephone antenna)  
5 Pull electrical lines approx. 15 cm out of left outside mirror (M21/1) or right outside mirror (M21/2) (Arrow D) Model 205.0/1/2, 213, 253, 293 with code 274 (Telephone antenna)  
6 Remove fuse (2) at connector housing (1) of electrical line for left telephone antenna (A2/102) or right telephone antenna (A2/103) using a suitable screwdriver (3) (arrow A)    
7 Release connector housing (1) (arrow B) and remove (arrow C)    
8 Remove bolt (8)    
9 Unclip left telephone antenna (A2/102) or right telephone antenna (A2/103) (arrow E)    
10 Remove left telephone antenna (A2/102) or right telephone antenna (A2/103) in direction of arrow (arrow F) INSTALLATION IMPORTANT Ensure that left telephone antenna (A2/102) or right telephone antenna (A2/103) is seated correctly in guides (arrows G).  
11 Remove left telephone antenna (A2/102) or right telephone antenna (A2/103) and completely pull its electrical line out of seal (6) and left outside mirror (M21/1) or right outside mirror (M21/2)    
12 Install in the reverse order