LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> C300 4Matic, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 341 (Electrical System - Body - 253 Chassis 4 Of 8) >> Testing & Repair >> Remove/Install TV Card Reader - AR82.85-P-7367LXM

Remove/Install TV Card Reader - AR82.85-P-7367LXM

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 253 

as of model year 2020 

with code 865 (digital TV) 

Fig 1: TV Card Reader Components Location - Model 253 As Of Model Year 2020 With Code 865
G14471594REMOVINGINSTALLINGSPECIAL TOOLCourtesy of MERCEDES-BENZ USA
Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
REMOVINGINSTALLING Remove/install     
1 Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).    
2 Open glove compartment.    
3 Unclip TV card reader (A50/8) and remove until electrical connector (1) is accessible. SPECIAL TOOL Long wedge Fig 2
4 Disconnect electrical connector (1) and remove TV card reader (A50/8) from glove compartment.    
5 Install in the reverse order.    
Fig 2: Identifying Long Wedge (115 589 03 59 00)
G13657072Courtesy of MERCEDES-BENZ USA