Remove/Install TV Antenna Amplifier - AR82.62-P-8302LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205.0/1/2/3, 253
with code 865 (digital TV)
Shown on right side of vehicle
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1.1 | Remove paneling from left A-pillar | When removing the TV 2 antenna amplifier (A94/6) | |
| AR68.30-P-4050LW | |||
| 1.2 | Remove paneling on right A-pillar | When removing the TV 3 antenna amplifier (A94/7) | |
| AR68.30-P-4050LW | |||
| 2 | Disconnect electrical connector (2) | ||
| 3 | Remove bolt (1) | ||
| 4 | Unclip TV 2 antenna amplifier (A94/6) or TV 3 antenna amplifier (A94/7) at A-pillar and disconnect electrical connector (3) | ||
| 5 | Install in the reverse order |