Remove/Install Rear Axle Level Sensor - AR82.10-P-0005LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
Model 213
Model 238
Model 253
Model 293
Shown on rear wheel removed on model 205
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notes on repair work on suspension components | AH00.00-P-0100-01A | ||
| Remove/install | |||
| 1 | Raise vehicle. | AR00.60-P-1006A | |
| 2 | Disconnect electrical connector (1) from left rear level sensor (B22/7) or from right rear level sensor (B22/10). | ||
| 3 | Unclip mount of electric line from holder (5). | Model 205.386/387/486/487 Model 253 Model 293 |
|
| 4 | Unscrew nut (2) and unhook linkage (3) from left rear level sensor (B22/7) or right rear level sensor (B22/10). | ||
| 5 | Unscrew nut (4) and remove left rear level sensor (B22/7) or right rear level sensor (B22/10) together with the holder (5). | ||
| 6 | Remove screws (6) and remove left rear level sensor (B22/7) or right rear level sensor (B22/10) from holder (5). | When replacing left rear level sensor (B22/7) or right rear level sensor (B22/10). | |
| 7 | Install in the reverse order. | ||
| 8 | Calibrate left rear level sensor (B22/7) or right rear level sensor (B22/10) using vehicle diagnosis system. | When replacing left rear level sensor (B22/7) or right rear level sensor (B22/10). | |
| Model 293 | AD00.00-P-2000-06FR | ||
| Model 205, 213, 253 | AD00.00-P-2000-04B | ||
| Model 238 | AD00.00-P-2000-06LWO | ||
| Check | |||
| 9 | Check and correct headlamp adjustment. | When replacing left rear level sensor (B22/7) or right rear level sensor (B22/10). | |
| Model 293 | AP82.10-P-8260KA | ||
| Model 205, 253 | AP82.10-P-8260E | ||
| Model 213, 238 | AP82.10-P-8260J |