Remove/Install Rain/Light Sensor - AR82.30-P-7800LF
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
with code 345 (rain sensor)
Model 213, 217, 222, 238, 253, 293
MODIFICATION NOTES
| 19.06.2020 | Replace rain and light sensor with additional functions (B38/2) if soiled. | Operation step 5. |
Shown on model 222
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 2 | Unclip and remove cover (1). | Fig 2 | |
| 3 | Unclip and remove cover (2). | Fig 2 | |
| 4 | Unhook retaining clamps (4) on both sides of rain and light sensor with additional functions (B38/2). | ||
| 5 | Remove rain and light sensor with additional functions (B38/2) and disconnect electrical connector (3). | Otherwise, soiling may cause the rain/light sensor with additional functions (B38/2) to malfunction. If soiling is present, ↓ replace rain and light sensor with additional functions (B38/2). |
|
| 6 | Install in the reverse order. | ||
| Initial startup | |||
| 7 | Commission rain and light sensor with additional functions (B38/2). | When replacing rain and light sensor with additional functions (B38/2). | |
| Model 293 | AD00.00-P-2000-06FR | ||
| Model 205 with code 345 (rain sensor) |
AD00.00-P-2000-04B | ||
| Model 213, 217, 222, 253 | |||
| Model 238 | AD00.00-P-2000-06LWO |