Remove/Install Global Positioning System (GPS) Antenna Splitter - AR82.85-P-0007LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205, 253
with code 355 (Preinstallation for retrofitting navigation system)
with code 362 (HERMES communications module LTE)
with code 830 (China version)
Model 205.0/2
with code 344 (Antenna preinstallation for taxi)
with code 355 (Preinstallation for retrofitting navigation system)
Model 205.0/2
with code 344 (Antenna preinstallation for taxi)
with code 360 (HERMES UMTS)
Model 205.0/2
with code 344 (Antenna preinstallation for taxi)
with code 362 (HERMES communications module LTE)
Model 205.0/2
with code 344 (Antenna preinstallation for taxi)
with code 531 (COMAND APS)
Shown on model 205.0
Fig 1: Global Positioning System (GPS) Antenna Splitter Components Location - Model 253 With Code 355; 362; 830
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove front left door sill | Model 205.0/1/2, 253 | AR68.30-P-4100LW |
| Model 205.3/4 | AR68.30-P-4100CLW | ||
| 2 | Release front seat and tilt backwards | Model 205.0/1/2/3, 253 | AR91.10-P-1000LW |
| Model 205.4 | AR91.10-P-1000LWR | ||
| 3 | Release front left floor covering (1) | ||
| 4 | Take off cover (2) | ||
| 5 | Detach electrical connections (3) | ||
| 6 | Unclip global positioning system antenna splitter (A2/5) and remove | ||
| 7 | Install in the reverse order |