LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> C300 4Matic, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 341 (Electrical System - Body - 253 Chassis 4 Of 8) >> Testing & Repair >> Remove/Install Antenna Amplifier/Compensator For Telephone - AR82.62-P-0005LW

Remove/Install Antenna Amplifier/Compensator For Telephone - AR82.62-P-0005LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205, 253 

as of model year 2017 

with code 386 (Comfort telephony) 

except code 379 (Telephone module with Bluetooth® (SAP profile)) 

Model 205, 253 

up to model year 2017 

with code 386 (Comfort telephony) 

Model 205, 293 

with code 899 (Multifunction telephony) 

Shown on model 253.### 1# up to model year 2017 with code 386 (Comfort telephony) 

Fig 1: Antenna Amplifier/Compensator For Telephone Components Location - Model 253 As Of Model Year 2017 With Code 386 Except Code 379
G14188034REMOVINGINSTALLINGCourtesy of MERCEDES-BENZ USA
Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
REMOVINGINSTALLING Remove/install     
1 Remove right front seat. Model 205.4 as of model year 2017
with code 386 (Comfort telephony)
except code 379 (Telephone module with Bluetooth® (SAP profile))
Model 205.4 up to model year 2017
with code 386 (Comfort telephony)
Model 205.4
with code 899 (Multifunction telephony)
AR91.10-P-1000LWR
    Model 205.0/1/2/3, 253 as of model year 2017
with code 386 (Comfort telephony) except code 379 (Telephone module with Bluetooth® (SAP profile))
Model 205.0/1/2/3, 253 up to model year 2017 with code 386 (Comfort telephony)
Model 205.0/1/2/3, 293 with code 899 (Multifunction telephony)
AR91.10-P-1000LW
2 Detach front right floor covering.    
3 Remove air duct (1).    
4 Remove cover from cable duct (2).    
5 Remove cellular telephone system antenna amplifier/compensator (A28/15) from holder (4) and disconnect electrical connectors (3).    
6 Install in the reverse order.