LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> C300 4Matic, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 341 (Electrical System - Body - 253 Chassis 4 Of 8) >> Testing & Repair >> Check Wiper Arms And Adjust - AR82.30-P-6000LW

Check Wiper Arms And Adjust - AR82.30-P-6000LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205 

Model 213 

Model 238 except code 874 (MAGIC VISION CONTROL incl. heated windshield washer system) 

Model 253, 293 

Shown on model 205 

Fig 1: Wiper Arms Components Location - Model 253 (Shown On Model 205)
G14187994Courtesy of MERCEDES-BENZ USA
WARNING Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). AS82.30-Z-0001-01A 
  Notes on wiper arm adjustment   AH82.30-P-0001-01A
INSPECT Check     
1 Move windshield wiper system into park position.    
2 Switch off ignition and store transmitter key outside of transmission range (min. 2 m).    
3 Move windshield wiper system by hand into reversing position. IMPORTANT Do not move the windshield wiper system beyond the reversing position.  
4 Remove wiper blades. NOTES When working on raised driver-side wiper arm (1) or passenger-side wiper arm (2), ensure that they do not fall onto the windshield. Otherwise windshield will be damaged.  
CLEAN Clean     
5 Clean wiper blade mounts on driver-side wiper arm (1) and passenger-side wiper arm (2) using a clean cloth.    
6 Check angle of incidence of driver-side wiper arm (1) and passenger-side wiper arm (2) relative to windshield.   AR82.30-P-6000-01LW 
    NOTES When changing from the reversing position to the park position, ensure that the driver-side wiper arm (1) and the passenger-side wiper arm (2) do not make direct contact with windshield.
Otherwise windshield will be damaged.		  
    Angle of incidence of passenger-side wiper arm in parked position *BE82.30-P-1004-01M 
    Angle of incidence of driver-side wiper arm in parked position *BE82.30-P-1003-01M 
    Angle of incidence of passenger-side wiper arm in reversing position *BE82.30-P-1002-01M 
    Angle of incidence of driver-side wiper arm in reversing position *BE82.30-P-1001-01M 
    SPECIAL TOOL Adapter Fig 2
    SPECIAL TOOL Adjusting tool set Fig 4
  Adjust     
7 Adjust angle of incidence of driver-side wiper arm (1) or passenger-side wiper arm (2) in the park position. If the test values deviate from the tolerance range in the reversing position or in the parked and reversing position. AR82.30-P-6100-01LW 
    IMPORTANT Distort driver-side wiper arm (1) or passenger-side wiper arm (2) by at least the value of the tolerance deviation in reversing position.  
    Angle of incidence of driver-side wiper arm in parked position *BE82.30-P-1003-01M 
    Angle of incidence of passenger-side wiper arm in parked position *BE82.30-P-1004-01M 
    SPECIAL TOOL Adapter Fig 2
    SPECIAL TOOL Adjusting tool set Fig 4
8 Adjust windshield wiper system. When the check values of the driver-side wipe arm (1) and passenger-side wiper arm (2) deviate from the tolerance range in the parking position. AR82.30-P-6400-01LW 
    Angle of incidence of passenger-side wiper arm in parked position *BE82.30-P-1004-01M 
    Angle of incidence of driver-side wiper arm in parked position *BE82.30-P-1003-01M 
    TORQUE SPECIFICATION Screw/bolt, windshield wiper system bracket to partition wall *BA82.30-P-1004-01M 
    SPECIAL TOOL Adapter Fig 2
    SPECIAL TOOL Adjusting tool set Fig 4
    SPECIAL TOOL Extraction hook Fig 3
9 Mount wiper blades.    
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 205 Model 213
BE82.30-P-1001-01M Angle of incidence of driver-side wiper arm in reversing position Left-hand drive vehicle ∠° -2, 1...-6, 1 -2, 1...-6, 1
Right-hand drive vehicle ∠° +2, 1...+6, 1 +2, 1...+6, 1
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 238 Model 253
BE82.30-P-1001-01M Angle of incidence of driver-side wiper arm in reversing position Left-hand drive vehicle ∠° -0, 5...-4, 5 -1, 2...-5, 2
Right-hand drive vehicle ∠° +0, 5...+4, 5 +1, 2...+5, 2
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 293
BE82.30-P-1001-01M Angle of incidence of driver-side wiper arm in reversing position Left-hand drive vehicle ∠° -1, 2...-5, 2
Right-hand drive vehicle ∠° +1, 2...+5, 2
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 205 Model 213
BE82.30-P-1002-01M Angle of incidence of passenger-side wiper arm in reversing position Left-hand drive vehicle ∠° -2, 1...-6, 1 -2, 1...-6, 1
Right-hand drive vehicle ∠° +2, 1...+ 6, 1 +2, 1...+6, 1
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 238 Model 253
BE82.30-P-1002-01M Angle of incidence of passenger-side wiper arm in reversing position Left-hand drive vehicle ∠° -0, 8...-4, 8 -1, 8...-5, 8
Right-hand drive vehicle ∠° +0, 8...+4, 8 +1, 8...+5, 8
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 293
BE82.30-P-1002-01M Angle of incidence of passenger-side wiper arm in reversing position Left-hand drive vehicle ∠° -1, 8...-5, 8
Right-hand drive vehicle ∠° +1, 8...+5, 8
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 205 Model 213
BE82.30-P-1003-01M Angle of incidence of driver-side wiper arm in parked position Left-hand drive vehicle ∠° +3, 5...+7, 5 +3, 5...+7, 5
Right-hand drive vehicle ∠° -3, 5...-7, 5 -3, 5...-7, 5
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 238 Model 253
BE82.30-P-1003-01M Angle of incidence of driver-side wiper arm in parked position Left-hand drive vehicle ∠° +2, 1...+6, 1 +3, 4...+7, 4
Right-hand drive vehicle ∠° -2, 1...-6, 1 -3, 4...-7, 4
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 293
BE82.30-P-1003-01M Angle of incidence of driver-side wiper arm in parked position Left-hand drive vehicle ∠° +3, 4...+7, 4
Right-hand drive vehicle ∠° -3, 4...-7, 4
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 205 Model 213
BE82.30-P-1004-01M Angle of incidence of passenger-side wiper arm in parked position Left-hand drive vehicle ∠° +3, 1...+7, 1 +3, 1...+7, 1
Right-hand drive vehicle ∠° -3, 1...-7, 1 -3, 1...-7, 1
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 238 Model 253
BE82.30-P-1004-01M Angle of incidence of passenger-side wiper arm in parked position Left-hand drive vehicle ∠° +1, 3...+5, 3 +3, 0...+7, 0
Right-hand drive vehicle ∠° -1, 3...-5, 3 -3, 0...-7, 0
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 293
BE82.30-P-1004-01M Angle of incidence of passenger-side wiper arm in parked position Left-hand drive vehicle ∠° +3, 0...+7, 0
Right-hand drive vehicle ∠° -3, 0...-7, 0
WINDSHIELD WIPER

Number Designation Model 205 Model 213
BA82.30-P-1004-01M Screw/bolt, windshield wiper system bracket to partition wall Nm 11 11
WINDSHIELD WIPER

Number Designation Model 238 Model 253
BA82.30-P-1004-01M Screw/bolt, windshield wiper system bracket to partition wall Nm 10 11
WINDSHIELD WIPER

Number Designation Model 293
BA82.30-P-1004-01M Screw/bolt, windshield wiper system bracket to partition wall Nm 10
Fig 2: Identifying Adapter (205 589 00 21 00)
G10134557Courtesy of MERCEDES-BENZ USA
Fig 3: Identifying Extraction Hook (140 589 02 33 00)
G11128914Courtesy of MERCEDES-BENZ USA
Fig 4: Identifying Adjusting Tool Set (211 589 02 21 00)
G11129282Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals