Remove/Install Speaker Cover - AR72.10-P-1032LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205, 213, 238, 253
Shown on left side of vehicle on Model 238
| Remove | |||
| 1 | Remove left and right door panel from Front door | Model 205, 213, 253 | AR72.10-P-1000LW |
| Model 238 | AR72.10-P-1000LWO | ||
| 2 | Remove trim piece (2) from door panel of Front door | ||
| 3 | Remove adhesive residue from area of catch hooks (3) on corresponding speaker cover (1) without leaving any residue | When removing speaker cover (1) of mid-range speaker. | |
| 4 | Remove corresponding speaker cover (1) from trim piece (2) | ||
| Install | |||
| 5 | Clip corresponding speaker cover (1) into trim piece (2) | ||
| Risk of injury caused by burns to skin and eyes, risk of poisoning caused by inhaling vapors when working with plastics | Wear protective gloves and safety glasses. Ensure that the work area is adequately ventilated. |
AS00.00-Z-0001-02A | |
| 6 | Fix catch hooks (3) in place using hot-melt adhesive beads | When installing speaker cover (1) of mid-range speaker. Thermoplastic adhesive gun |
|
| 7 | Install trim piece (2) in door panel of Front door | ||
| 8 | Install door panel on Front door | Model 205, 213, 253 | AR72.10-P-1000LW |
| Model 238 | AR72.10-P-1000LWO |