Exhaust System - BA49.10-P-1000-02A
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine 274, 276, 651 in model 205, 253
EXHAUST SYSTEM
| Number | Designation | Engine 274 in model 205 | Engine 274 in model 253 | ||
|---|---|---|---|---|---|
| BA49.10-P-1001-02A | Clamp, exhaust line for catalytic converter to turbocharger | Nm | 17 | 17 | |
| BA49.10-P-1002-02A | Nut/screw/bolt, bracket to catalytic converter | Nm | 25 | 25 | |
| BA49.10-P-1003-02A | Nut, bracket for catalytic converter to crankcase bracket | Nm | 25 | 25 | |
| BA49.10-P-1004-02A | Bolt, bracket for catalytic converter to crankcase | M6 | Nm | - | - |
| M8 | Nm | 25 | 25 | ||
| BA49.10-P-1005-02A | Clamp, front exhaust system to catalytic converter/diesel particulate filter | Nm | 22 | 22 | |
| BA49.10-P-1006-02A | Screw/bolt, bracket to front exhaust system | Nm | 20 | 20 | |
| BA49.10-P-1007-02A | Nut, elastomer bearing to front exhaust system bracket | Nm | 20 | 20 | |
| BA49.10-P-1008-02A | Bolt, bracket for front exhaust system to body | Nm | 20 | 20 | |
| BA49.10-P-1009-02A | Bolt, suspension to rear reinforcement | Nm | 20 | 20 | |
| BA49.10-P-1010-02A | Bolt, bracket for front exhaust system to rear axle carrier | Nm | 27 | 27 | |
| BA49.10-P-1011-02A | Clamp, rear exhaust system to front exhaust system/rear exhaust system | Nm | 22 | 22 | |
| BA49.10-P-1012-02A | Bolt, rear exhaust system bracket to body | Nm | 20 | 20 | |
| BA49.10-P-1013-02A | Nut, bracket for catalytic converter to bracket for torque converter housing | Nm | - | - | |
| BA49.10-P-1014-02A | Screw/bolt, catalytic converter/diesel particulate filter bracket to bell housing/ Engine | M8 | Nm | - | - |
| M10 | Nm | - | - | ||
| BA49.10-P-1015-02A | Nut, bracket for diesel particulate filter to bracket for torque converter housing | Nm | - | - | |
| BA49.10-P-1016-02A | Bolt, flange connection for catalytic converter to exhaust line | Nm | - | - | |
| BA49.10-P-1017-02A | Nut, differential pressure sensor to bracket | Nm | 8 | 8 | |
| BA49.10-P-1018-02A | Bolt, differential pressure sensor pressure lines to holder | Nm | 5 | 5 | |
| BA49.10-P-1019-02A | Screw, differential pressure sensor holder to holder | Nm | 8 | 8 | |
| BA49.10-P-1020-02A | Screw, bracket of pressure line to gasoline particulate filter | Nm | 5 | 5 | |
EXHAUST SYSTEM
| Number | Designation | Engine 276 in model 205 | Engine 276 in model 253 | ||
|---|---|---|---|---|---|
| BA49.10-P-1001-02A | Clamp, exhaust line for catalytic converter to turbocharger | Nm | 17 | 17 | |
| BA49.10-P-1002-02A | Nut/screw/bolt, bracket to catalytic converter | Nm | 22 | 22 | |
| BA49.10-P-1003-02A | Nut, bracket for catalytic converter to crankcase bracket | Nm | - | - | |
| BA49.10-P-1004-02A | Bolt, bracket for catalytic converter to crankcase | M6 | Nm | - | - |
| M8 | Nm | - | - | ||
| BA49.10-P-1005-02A | Clamp, front exhaust system to catalytic converter/diesel particulate filter | Nm | 19 | 19 | |
| BA49.10-P-1006-02A | Screw/bolt, bracket to front exhaust system | Nm | 20 | 20 | |
| BA49.10-P-1007-02A | Nut, elastomer bearing to front exhaust system bracket | Nm | 20 | 20 | |
| BA49.10-P-1008-02A | Bolt, bracket for front exhaust system to body | Nm | 20 | 20 | |
| BA49.10-P-1009-02A | Bolt, suspension to rear reinforcement | Nm | 20 | - | |
| BA49.10-P-1010-02A | Bolt, bracket for front exhaust system to rear axle carrier | Nm | 27 | 27 | |
| BA49.10-P-1011-02A | Clamp, rear exhaust system to front exhaust system/rear exhaust system | Nm | 22 | 22 | |
| BA49.10-P-1012-02A | Bolt, rear exhaust system bracket to body | Nm | 20 | 20 | |
| BA49.10-P-1013-02A | Nut, bracket for catalytic converter to bracket for torque converter housing | Nm | 22 | 22 | |
| BA49.10-P-1014-02A | Screw/bolt, catalytic converter/diesel particulate filter bracket to bell housing/ Engine | M8 | Nm | 20 | 20 |
| M10 | Nm | 39 | 39 | ||
| BA49.10-P-1015-02A | Nut, bracket for diesel particulate filter to bracket for torque converter housing | Nm | - | - | |
| BA49.10-P-1016-02A | Bolt, flange connection for catalytic converter to exhaust line | Nm | 22 | 22 | |
| BA49.10-P-1017-02A | Nut, differential pressure sensor to bracket | Nm | 8 | 8 | |
| BA49.10-P-1018-02A | Bolt, differential pressure sensor pressure lines to holder | Nm | 5 | 5 | |
| BA49.10-P-1019-02A | Screw, differential pressure sensor holder to holder | Nm | 8 | 8 | |
| BA49.10-P-1020-02A | Screw, bracket of pressure line to gasoline particulate filter | Nm | 5 | 5 | |
EXHAUST SYSTEM
| Number | Designation | Engine 651 in model 205 | Engine 651 in model 253 | ||
|---|---|---|---|---|---|
| BA49.10-P-1001-02A | Clamp, exhaust line for catalytic converter to turbocharger | Nm | 17 | 17 | |
| BA49.10-P-1002-02A | Nut/screw/bolt, bracket to catalytic converter | Nm | 20 | 20 | |
| BA49.10-P-1003-02A | Nut, bracket for catalytic converter to crankcase bracket | Nm | 20 | 20 | |
| BA49.10-P-1004-02A | Bolt, bracket for catalytic converter to crankcase | M6 | Nm | 9 | 9 |
| M8 | Nm | 20 | 20 | ||
| BA49.10-P-1005-02A | Clamp, front exhaust system to catalytic converter/diesel particulate filter | Nm | 14 | 14 | |
| BA49.10-P-1006-02A | Screw/bolt, bracket to front exhaust system | Nm | 20 | 20 | |
| BA49.10-P-1007-02A | Nut, elastomer bearing to front exhaust system bracket | Nm | 20 | 20 | |
| BA49.10-P-1008-02A | Bolt, bracket for front exhaust system to body | Nm | 20 | 20 | |
| BA49.10-P-1009-02A | Bolt, suspension to rear reinforcement | Nm | 20 | 20 | |
| BA49.10-P-1010-02A | Bolt, bracket for front exhaust system to rear axle carrier | Nm | 27 | 27 | |
| BA49.10-P-1011-02A | Clamp, rear exhaust system to front exhaust system/rear exhaust system | Nm | 22 | 22 | |
| BA49.10-P-1012-02A | Bolt, rear exhaust system bracket to body | Nm | 20 | 20 | |
| BA49.10-P-1013-02A | Nut, bracket for catalytic converter to bracket for torque converter housing | Nm | - | - | |
| BA49.10-P-1014-02A | Screw/bolt, catalytic converter/diesel particulate filter bracket to bell housing/ Engine | M8 | Nm | 20 | 20 |
| M10 | Nm | - | - | ||
| BA49.10-P-1015-02A | Nut, bracket for diesel particulate filter to bracket for torque converter housing | Nm | 20 | 20 | |
| BA49.10-P-1016-02A | Bolt, flange connection for catalytic converter to exhaust line | Nm | - | - | |
| BA49.10-P-1017-02A | Nut, differential pressure sensor to bracket | Nm | - | - | |
| BA49.10-P-1018-02A | Bolt, differential pressure sensor pressure lines to holder | Nm | - | - | |
| BA49.10-P-1019-02A | Screw, differential pressure sensor holder to holder | Nm | - | - | |
| BA49.10-P-1020-02A | Screw, bracket of pressure line to gasoline particulate filter | Nm | - | - | |