LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> C300 4Matic, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Electrical System - Body - 253 Chassis 2 Of 8) >> Basic Knowledge >> Speaker Output Function >> Speaker Output Function - GF82.62-P-4212RFN

Speaker Output Function - GF82.62-P-4212RFN

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model 253 (except 253.99) 

as of Model year 2020 

G14474468Courtesy of MERCEDES-BENZ USA

Function requirements, general 

Speaker output, general 

A distinction is made between the following procedures:

IMPORTANT Model 253 (except 253.99)

as of Model year 2020

with code 362 (HERMES LTE)

With telematics services with a voice connection (e.g. emergency call), the center instrument panel speaker is used for voice output and actuated via direct lines by the HERMES control unit. This is not taken into consideration in the following.

Speaker output in vehicles except code 810 (Sound system) and except code 853 ("Midline" sound system) 

The head unit outputs the audio signals via the following speakers:

Speaker output in vehicles with code 853 ("Midline" sound system) 

The head unit outputs the audio signals via the following speakers:

The head unit actuates the following speakers via the subwoofer amplifier:

Speaker output in vehicles with CODE 810 (Sound system) 

The audio signals are forwarded by the head unit over MOST to the sound system amplifier control unit where they are finally amplified and output at the following speakers through direct lines:

  Electrical function schematic for speaker system   PE82.62-P-2300-97FBC
  Overview of system components, telematics   GF82.85-P-9999RFM