203 589 02 33 00 Puller - WS28.00-P-0078B
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 203.08/09/28/29, 204.08/09/28/29/90/93/98/99, 205, 206, 207.38, 211.08/09/28/29, 212, 213, 216, 217, 218, 220.08/18, 221.08/09/18/19, 222, 223, 232, 238, 253, 257, 290
Use in FG 28/33/Set B
Purpose:
Puller for detaching flange of front propeller shaft from transfer case.
Procurement information:
This workshop equipment can be ordered directly through the regular replacement part ordering process at the GLC/LC.
| 203 589 02 33 00 Puller | FG 01/33/46 Set B | WS01.00-P-0139B | |
| 203 589 02 33 01 Threaded spindle | Model 203.08/28, 205, 211.080/082/083/280/282/283, 220.08/18 FG 28/01/33/46/Set B | WS28.00-P-0078-01B |