163 589 03 43 00 Press - WS00.00-P-0057Z
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model all (CAR, Light transporter)
Use in FG 00/01/33/46
Purpose:
Hydraulic press for pressing out axle joints, e.g. upper ball joint and supporting joint.
NOTE:
Do not exceed max. torque of 25 Nm at the spindle of the press.
In combination with W 163 589 01 43 00 Padding for model 163.
 Courtesy of MERCEDES-BENZ USA
|