000 588 05 90 00 Clamping Grommet - WS00.00-P-0036B

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model all

Model 100, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 123, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 201, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 242, 245, 246, 251, 253, 292

Use in FG 00/Set B

Purpose:

Clamp grommet for suctioning off exhaust on vehicle.

Technical note:

Inner tube clamping

Procurement information:

This workshop equipment is not distributed through the regular replacement part ordering process in GLC/LC, but directly from the manufacturer/supplier. Recommended workshop equipment and information on the manufacturers/suppliers can be found below.

Courtesy of MERCEDES-BENZ USA

Manufacturer 1

Nederman GmbH

Nurtinger StraBe 50

73257 Kongen

Germany

http://www.nederman.de

Type/model: Inner tube clamping

Article no.: 20867661

Manufacturer 2

NORFI Absaugtechnik GmbH

KelterstraBe 65

72669 Unterensingen

Germany

http://www.norfi.de

Type/model: Inner tube clamping

Article no.: 25-4950-100