Transmission Oil Cooling - BA27.55-P-1000-01D
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 722.55/9, 725.0
TRANSMISSION OIL COOLING
| Number | Designation | Transmission 722.55 | Transmission 722.9 | ||
|---|---|---|---|---|---|
| BA27.55-P-1001-01D | Union nut, oil line to oil cooler | Nm | 25 | 25 | |
| BA27.55-P-1002-01D | Bolt, oil line to transmission Banjo bolt housing | Stage 1 | Nm | 5 | 5 |
| Stage 2 | ∠° | 90 | 90 | ||
| Hexalobular bolt | Nm | 12 | 12 | ||
| BA27.55-P-1003-01D | Screw, oil cooler oil line to oil pan | Nm | 12 | 12 | |
| BA27.55-P-1004-01D | Bolt, clamp to oil line | Nm | 8 | 8 | |
| BA27.55-P-1005-01D | Bolt, clamp of oil cooler oil line to bracket | Nm | 8 | 8 | |
| BA27.55-P-1006-01D | Screw, oil cooler oil line clamp to oil pan | Nm | 8 | 8 | |
| BA27.55-P-1007-01D | Oil cooler oil line/oil supply line to transfer case | Nm | 12 | 12 | |
| BA27.55-P-1008-01D | Banjo bolt, oil line to oil cooler | Nm | 25 | 25 | |
| BA27.55-P-1009-01D | Bolt, transmission auxiliary oil pump to transmission housing | Nm | - | 8 | |
| BA27.55-P-1010-01D | Nut, retaining plate to connection fitting for oil cooler oil line | Nm | - | 20 | |
| BA27.55-P-1011-01D | Bolt, bracket for thermostat to oil pan | Nm | - | 10 | |
| BA27.55-P-1012-01D | Bolt, thermostat to bracket | Nm | - | 6 | |
| BA27.55-P-1013-01D | Bolt, bracket for oil line/oil cooling system to oil pan | Nm | - | 12 | |
| BA27.55-P-1014-01D | Screw/bolt, auxiliary oil filter bracket to transmission | Nm | - | - | |
| BA27.55-P-1015-01D | Bolt, clamp to bracket for oil filter | Nm | - | - | |
| BA27.55-P-1016-01D | Oil filter cover to oil filter housing | Nm | - | - | |
| BA27.55-P-1017-01D | Bolt, bracket for oil line to transmission housing | Nm | - | - | |
| BA27.55-P-1018-01D | Bolt, oil cooler to transmission | Nm | - | - | |
| BA27.55-P-1019-01D | Screw, oil cooler to oil pan | Nm | - | - | |
| BA27.55-P-1020-01D | Screw, holder to oil pan top section | Nm | - | - | |
| BA27.55-P-1021-01D | Screw, holder for oil lines to holder | Nm | - | - | |
| BA27.55-P-1022-01D | Screw, holder for oil lines to oil pan top section | Nm | - | - | |
| BA27.55-P-1023-01D | Screw, holder for oil lines to oil pan bottom section | Nm | - | - | |
| BA27.55-P-1024-01D | Bolt of oil cooler to bracket | Nm | - | - | |
| BA27.55-P-1025-01D | Screw, holder for oil line to engine block | Nm | - | - | |
TRANSMISSION OIL COOLING
| Number | Designation | Transmission 722.9 in model 463 with engine 113/157/273/279 | Transmission 722.9 in model 463 with engine 176 | |||
|---|---|---|---|---|---|---|
| BA27.55-P-1001-01D | Union nut, oil line to oil cooler | Nm | 25 | 25 | ||
| BA27.55-P-1002-01D | Bolt, oil line to transmission Banjo bolt housing | Stage 1 | Nm | 5 | 5 | |
| Stage 2 | ∠° | 90 | 90 | |||
| Hexalobular bolt | Nm | 12 | 12 | |||
| BA27.55-P-1003-01D | Screw, oil cooler oil line to oil pan | Nm | 12 | 12 | ||
| BA27.55-P-1004-01D | Bolt, clamp to oil line | Nm | 8 | 8 | ||
| BA27.55-P-1005-01D | Bolt, clamp of oil cooler oil line to bracket | Nm | 8 | 8 | ||
| BA27.55-P-1006-01D | Screw, oil cooler oil line clamp to oil pan | Nm | 8 | 8 | ||
| BA27.55-P-1007-01D | Oil cooler oil line/oil supply line to transfer case | Nm | 12 | 12 | ||
| BA27.55-P-1008-01D | Banjo bolt, oil line to oil cooler | Nm | 25 | 25 | ||
| BA27.55-P-1009-01D | Bolt, transmission auxiliary oil pump to transmission housing | Nm | 8 | 8 | ||
| BA27.55-P-1010-01D | Nut, retaining plate to connection fitting for oil cooler oil line | Nm | 20 | 20 | ||
| BA27.55-P-1011-01D | Bolt, bracket for thermostat to oil pan | Nm | 10 | 10 | ||
| BA27.55-P-1012-01D | Bolt, thermostat to bracket | Nm | 6 | 6 | ||
| BA27.55-P-1013-01D | Bolt, bracket for oil line/oil cooling system to oil pan | Nm | 12 | 12 | ||
| BA27.55-P-1014-01D | Screw/bolt, auxiliary oil filter bracket to transmission | Nm | - | - | ||
| BA27.55-P-1015-01D | Bolt, clamp to bracket for oil filter | Nm | - | - | ||
| BA27.55-P-1016-01D | Oil filter cover to oil filter housing | Nm | - | - | ||
| BA27.55-P-1017-01D | Bolt, bracket for oil line to transmission housing | Nm | - | 35 | ||
| BA27.55-P-1018-01D | Bolt, oil cooler to transmission | Nm | - | - | ||
| BA27.55-P-1019-01D | Screw, oil cooler to oil pan | Nm | - | - | ||
| BA27.55-P-1020-01D | Screw, holder to oil pan top section | Nm | - | - | ||
| BA27.55-P-1021-01D | Screw, holder for oil lines to holder | Nm | - | - | ||
| BA27.55-P-1022-01D | Screw, holder for oil lines to oil pan top section | Nm | - | - | ||
| BA27.55-P-1023-01D | Screw, holder for oil lines to oil pan bottom section | Nm | - | - | ||
| BA27.55-P-1024-01D | Bolt of oil cooler to bracket | Nm | - | - | ||
| BA27.55-P-1025-01D | Screw, holder for oil line to engine block | Nm | - | - | ||
TRANSMISSION OIL COOLING
| Number | Designation | Transmission 722.9 in model 463 with engine 642 | Transmission 725.0 | |||
|---|---|---|---|---|---|---|
| BA27.55-P-1001-01D | Union nut, oil line to oil cooler | Nm | 25 | - | ||
| BA27.55-P-1002-01D | Bolt, oil line to transmission housing | Banjo bolt | Stage 1 | Nm | 5 | - |
| Stage 2 | ∠° | 90 | - | |||
| Hexalobular bolt | Nm | 12 | 12 | |||
| BA27.55-P-1003-01D | Screw, oil cooler oil line to oil pan | Nm | 12 | 12 | ||
| BA27.55-P-1004-01D | Bolt, clamp to oil line | Nm | 8 | 8 | ||
| BA27.55-P-1005-01D | Bolt, clamp of oil cooler oil line to bracket | Nm | 8 | 8 | ||
| BA27.55-P-1006-01D | Screw, oil cooler oil line clamp to oil pan | Nm | 8 | 8 | ||
| BA27.55-P-1007-01D | Oil cooler oil line/oil supply line to transfer case | Nm | 12 | 12 | ||
| BA27.55-P-1008-01D | Banjo bolt, oil line to oil cooler | Nm | 25 | - | ||
| BA27.55-P-1009-01D | Bolt, transmission auxiliary oil pump to transmission housing | Nm | 8 | - | ||
| BA27.55-P-1010-01D | Nut, retaining plate to connection fitting for oil cooler oil line | Nm | 20 | - | ||
| BA27.55-P-1011-01D | Bolt, bracket for thermostat to oil pan | Nm | 10 | - | ||
| BA27.55-P-1012-01D | Bolt, thermostat to bracket | Nm | 6 | 6 | ||
| BA27.55-P-1013-01D | Bolt, bracket for oil line/oil cooling system to oil pan | Nm | 12 | 12 | ||
| BA27.55-P-1014-01D | Screw/bolt, auxiliary oil filter bracket to transmission | Nm | - | 12 | ||
| BA27.55-P-1015-01D | Bolt, clamp to bracket for oil filter | Nm | - | 9 | ||
| BA27.55-P-1016-01D | Oil filter cover to oil filter housing | Nm | - | 25 | ||
| BA27.55-P-1017-01D | Bolt, bracket for oil line to transmission housing | Nm | 20 | 12 | ||
| BA27.55-P-1018-01D | Bolt, oil cooler to transmission | Nm | - | 12 | ||
| BA27.55-P-1019-01D | Screw, oil cooler to oil pan | Nm | - | 8 | ||
| BA27.55-P-1020-01D | Screw, holder to oil pan top section | Nm | - | 8 | ||
| BA27.55-P-1021-01D | Screw, holder for oil lines to holder | Nm | - | 8 | ||
| BA27.55-P-1022-01D | Screw, holder for oil lines to oil pan top section | Nm | - | 8 | ||
| BA27.55-P-1023-01D | Screw, holder for oil lines to oil pan bottom section | Nm | - | 8 | ||
| BA27.55-P-1024-01D | Bolt of oil cooler to bracket | Nm | - | 8 | ||
| BA27.55-P-1025-01D | Screw, holder for oil line to engine block | Nm | - | 8 | ||