168 589 03 21 00 Parallel Support - WS27.00-P-0076C
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 700.42, 716.5, 722.3/7/8/9, 724.0/1, 725.0
Transmission 711.651/660/680/683/685
Transmission 716.508/509/513/514, 722.750/751
Transmission 725.1
Use in FG 26/27/Set C
Purpose:
Parallel gauge 400 x 40 x 20 mm for bearing and installation height measurements for drive, output and countershaft in torque converter housing and transmission housing.
For determining the shim size for the dual clutch.
For checking the correct seating of the torque converter after installation on the automatic transmission (transmission 722.9, 725.0/1).