140 589 06 34 00 Collet Chuck - WS27.00-P-0053C

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Transmission 716.5, 722.6/9, 724.2, 725.0/1

Use in FG 26/27/Set C

Purpose:

Clamping pliers for detaching ball bearings on drive and output shaft

NOTE: In combination with 001 589 50 33 00 Puller.

Courtesy of MERCEDES-BENZ USA