Remove/Install Side Supplemental Restraint System (SRS) Pressure Sensor - AR91.60-P-0760LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 205
MODEL 213
MODEL 238
MODEL 253
MODEL 293
Shown on left front door on model 205.0
Fig 1: Side Supplemental Restraint System (SRS) Pressure Sensor Components Location - Model 253 (Shown On Model 205.0 Left Door)
| Risk of injury during testing and repair operations related to nyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Disconnect ground line from on-board electrical system battery. | Model 205, 213, 253 | AR54.10-P-0003LW |
| Model 238 | AR54.10-P-0003LW0 | ||
| Model 293 | AR54.10-P-0003EQ | ||
| 2.1 | Remove door lining from the front door. | When removing pressure sensor (2) from front door. | |
| Model 205, 213, 253, 293 | AR72.10-P-1000LW | ||
| Model 238 | AR72.10-P-1000LWO | ||
| 2.2 | Remove door lining from the rear door. | Model 205.0/1/2, 253 with code 298 (Rear sidebag with belt force limiter) Model 213 with code 293 (Sidebag in rear left and right) When removing pressure sensor (2) from rear door. |
|
| AR72.12-P-1010LW | |||
| 3 | Disconnect electrical connector (1). | ||
| 4 | Lift tab (arrow A), rotate respective pressure sensor (2) counterclockwise through 90° and remove. | ||
| 5 | Install in the reverse order | ||
| Check | |||
| 6 | Check Supplemental Restraint System (SRS) using vehicle diagnosis system. | When replacing the pressure sensor (2). | |
| Model 205, 213, 253 | AD00.00-P-2000-04B | ||
| Model 238 | AD00.00-P-2000-06LW0 | ||
| Model 293 | AD00.00-P-2000-06FR |