Remove/Install Side Airbag Sensor - AR91.60-P-0710LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 205.0/1/2/3
MODEL 213
MODEL 253
MODEL 293
Shown on model 205.0 on left side of vehicle with front seat removed
Shown on model 213 with code 581 (Automatic air conditioning)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1.1 | Remove lower B-pillar trim. | Model 205.0/1/2 Model 213 Model 253 Model 293 |
AR68.30-P-4700LW |
| 1.2 | Remove door sill. | Model 205.3 | AR68.30-P-4100CLW |
| 2 | Disconnect ground line from on-board electrical system battery. | Model 293 | AR54.10-P-0003EQ |
| Model 205.0/1/2/3 Model 213 Model 253 |
AR54.10-P-0003LW | ||
| 3 | Remove retaining clips (4). | Model 213 with code 581 (Automatic air conditioning) | |
| 4 | Lift air duct (3) and swivel inwards until screw (1) is accessible. | Model 213 with code 581 (Automatic air conditioning) |
|
| 5 | Unscrew bolt (1). | *BA91.60-P-1008-01O | |
| 6 | Disconnect electrical connection (2). | ||
| 7 | Remove left side airbag sensor (A53) or right side airbag sensor (A54). | ||
| 8 | Install in the reverse order | ||
| 9 | Check Supplemental Restraint System (SRS) using vehicle diagnosis system. | ||
| Model 293 | AD00.00-P-2000-06FR | ||
| Model 205.0/1/2/3 Model 213 Model 253 |
AD00.00-P-2000-04B |
AIRBAG
| Number | Designation | Model 205.0/1/2/3 | Model 213 | |
|---|---|---|---|---|
| BA91.60-P-1008-01O | Bolt, sidebag sensor to B-pillar | Nm | 8 | 8 |
AIRBAG
| Number | Designation | Model 253 | Model 293 | |
|---|---|---|---|---|
| BA91.60-P-1008-01O | Bolt, sidebag sensor to B-pillar | Nm | 8 | 8 |