Remove/Install Front Backrest Seat Ventilation Motors - AR91.30-P-1900LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 205 with code 401
MODEL 213 with code 401
MODEL 238 with code 401
MODEL 253, 293 with code 401
Fig 1: Front Backrest Seat Ventilation Motors Components Location - Model 253 With Code 401 (Shown On Model 205.0)
Shown on model 205.0
| Remove/install | |||
| 1 | Remove seat backrest trim at seat backrest. | Model 205.0/1/2 with code 401 (Climatised front seats) except code 555 (AMG Performance seats) Model 213 with code 401 (Climatised front seats) except code 555 (AMG Performance seats) Model 253 with code 401 (Climatised front seats) except code 555 (AMG Performance seats) Model 293 with code 401 (Climatised front seats) |
AR91.10-P-1912LW |
| Model 205.3/4 with code 401 (Climatised front seats) except code 555 (AMG Performance seats) Model 238 with code 401 (Climatised front seats) |
AR91.10-P-1912CLW | ||
| 2 | Remove cable tie (1). | ||
| 3 | Disconnect electrical connection (6). | ||
| 4 | Release plug housing of electrical connector (6) on seat backrest frame and remove. | ||
| 5 | Unhook spring mat (4) on one side from eyelets (2, 3). | ||
| 6 | Unclip left front seat backrest seat ventilation motors (M18/10) or right front seat backrest seat ventilation motors (M18/12) from seat backrest padding (5) (arrows). | ||
| 7 | Lift spring mat (4) and remove left front seat backrest seat ventilation motors (M18/10) or right front seat backrest seat ventilation motors (M18/12). | ||
| 8 | Install in the reverse order |