Remove, Replace And Install Rear Center Seat Belt - AR91.40-P-0683LWA

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 205.0/1 with code 287 (Through-loading feature)

MODEL 205.2

MODEL 213.0 with code 287 (Through-loading feature)

MODEL 213.2

MODEL 253, 293

Courtesy of MERCEDES-BENZ USA

	Risk of injury. Injury may result when the tension in the spring in the automatic belt retractor is released.	Never disassemble automatic belt retractors.	AS91.00-Z-0002-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove rear left seat backrest cover.	Model 205.0/1 with code 287 (Through-loading feature) Model 205.2, 253, 293	AR91.18-P-1874LW
		Model 213.0 with code 287 (Through-loading feature) Model 213.2	AR91.18-P-1874LWE
2	Remove cover from rear seat backrest.
3	Remove screw (1) of seat belt retractor (4).	Bolt, center seat belt retractor to rear seat backrest	*BA91.40-P-1007-01U
4	Remove seat belt retractor (4) and guide seat belt (2) through seat belt duct (3).
5	Install in the reverse order

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 205.0	Model 205.1
BA91.40-P-1007-01U	Bolt, center seat belt retractor to rear seat backrest	Nm	35	35

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 205.2	Model 213
BA91.40-P-1007-01U	Bolt, center seat belt retractor to rear seat backrest	Nm	35	35

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 253	Model 293
BA91.40-P-1007-01U	Bolt, center seat belt retractor to rear seat backrest	Nm	35	35